PWNED 2.0 for iPhone and Touch Solution for Windows Users

Posted by:Aaron Besson
July 20th, 2008

PWNED is out and working great, but only for Mac at the moment and PC users seem to be feeling a little left out. Luckily there is a simple solution thanks to Sleepers.net and a user named Kinetic-X. You simply use WinPWN to pwn your iPhone to 1.1.4, use Installer to install BootNeuter and neuter your baseband, then restore in iTunes 7.7 to a custom 2.0 firmware that was built on a Mac with PWNED 2.0.

The step-by-step instructions are below, the links to the files you need are also there. You can refer to the original post for more info. Follow them carefully and you will have an unlocked first gen iPhone running 2.0.

Step 1: Use WinPWN 1.0 To PWN Your 1.1.4 iPhone. If you need WinPWN Get it: http://www.winpwn.com/files/winpwn_1.0.0.3_RC1_Setup.zip

Step 2: Install BootNeuter (Available Via Installer).

Step 3: Run BootNeuter and have it Neuter your iphone

Step 4: Make sure your iTunes version is at 7.7

Step 5: Grab a pre-created IPSW Made with PWNAGE 2.0 Mac. If you dont have one made you can grab one here: http://thepiratebay.org/tor/4305453/iThor__s_iPhone_2.0_Custom_Firmware_Vanilla_(5A347)

Step 6: Put your phone into recovery or DFU mode. Note that some users report DFU works best while others are reporting normal recovery mode works best. If you have an error, try swapping modes and toggle between these two types of recovery until one works.

Step 7: In iTunes Shif+Click the Restore button and find your custom IPSW Firmware file.

Step 8: Wait for it to complete! ENJOY!

Retweet This Post